CAPDASE AA Power Mount - Fast Wireless Charging Auto-Clamp & Auto-Alignment Car Mount focuses on the Innovative and Smarter mounting solution. It is equipped with cutting-edge Auto-sensor technology, to detect and determine the best wireless charging overlay position through the current and voltage generated by the transmitting coil of the holder and the receiving coil of the Smartphone. The operation is to perform identification and positioning by automatically adjusting the length of the supporting leg on the bottom (with beep adjustment prompt sound); to find out the Maximum current position, achieving the optimal charging performance, then tightly clamps the Smartphone automatically once aligned correctly. It is the ultimate gear for different Smartphone models for drivers and passengers.
It is equipped with a Qi Standard transmitter and delivers 5W/ 7.5W/ 10W/ 15W power segment, allows fast charging wirelessly with Qi-enabled smartphone models. The intelligent-clamps locking system is engineered with a Coil inductor. The clamps will open up automatically when starting the car engine, and effortlessly self-releasing by touching the top sensing button even car engine is off.
It is also engineered with an Automatic Alignment Memory System. It will remember the best-aligned coil’s positions when putting the same Smartphone into the holder the next time you use it. There is no need to process the alignment again, makes it compatible with any smartphone size even wearing its protective case. It is flexible to adjust the display at an optimal viewing angle. With full access to device controls and ports, either in landscape or portrait viewing, for convenient navigating, calling, audio, video, and internet browsing while enjoy wirelessly & fast charging at the same time. It is a perfect companion in the vehicle and safe & fast charging while driving.
Gooseneck Arm – Extra Long Edition-300mm
- 300mm long from the suction cup to the ball head, giving your extra flexibility
- A bendable Arm allows flexible distance adjustment for the optimal angle
- Support Pad helps to fix on the dashboard to maximize stability
- Swivel Ball-head allows rotating joint for fine-tuning to the optimal viewing angle
- Strengthen Vacuum suction cup equipped with PU sticky gel substance
- Able to lock securely at Windshield or Dashboard * to maximize stability
Air Vent-Clip (optional)
- Conveniently install and release just only passing by finger
- Swivel Ball-head allows rotating joint for fine-tuning to the optimal viewing
- Rubber pads equipped provide non-slip and avoid scratch to the blade.
• A satisfying visual sense of technology and design outlook with compact size
• Automatic identification with both coil location of Smartphone & Holder
• Auto-adjusting the supporting legs with a continuous prompt beeping sound when performing the alignment
• To maximize charging efficiency & tightly clamping Smartphone automatically once aligned correctly
• Built-in Supercapacitor, the clamp is self-releasing by touching the top sensing button on the back even the engine is off
• Equipped with advanced torque stepping motor, More stable and Noise reduction with Anti-shake from the clamp
• Automatic Alignment Memory System, remembers the coil position of Smartphone model aligned from last time
• Delivers 5W/ 7.5W/ 10W/ 15W power segment, allows fast charging wirelessly compatible with Qi-enabled smartphone models
• Anti-slip silicone mat pads on both clamps and supporting legs prevent scratching the device.
• Prevent over-voltage, current, temperature, and short-circuit protection.
• A built-in supercapacitor can also release the clamp even when the car engine is turned off.
Supports 7.5W fast-charging Qi-standard iPhone 12 requirement.
• Please be sure the AA Power holder is connected with the power source before using it.
• The clamp operates by a soft-touch inductive button located at the top of the back.
• Cannot charge if the Smart device is worn with a metal case or the case is thicker than 3 mm.
• The wireless charging and will not work with any non-Qi-enabled smartphone.
Wireless charging notes:
• It uses electromagnetic fields to transfer power from a transmitting source *, to a receiving device * for charging the device’s battery wirelessly.
• Transmitting source: AA Power holder.
• Receiving device: Qi-enabled Smartphones.
Fast charging notes:
• Qi-enabled devices which are not supported fast charging will be powered at a standard charging speed.
• Required a separately sold QC 3.0 Car charger or Car charger higher than 18W to support fast charging.
• Attention to the power output of the charging source of the car charger will affect the charging speed performance.
Input: DC 12V/1.5A; 9V/2A; 5V/2A
Output: 5W / 7.5W / 10W / 15W
Induction distance: ＜6mm
Efficiency: 5W≤73%, 7.5W≤75%, 10W≤80%, 15W≤80%
Input port: USB-C
Product Dimension: 95*71.5*64.5 mm
Product weight: 156g
Clamps width: 55mm ~ 83mm
Material: 2.5D Surface Glass + PC + ABS
Applicable size: 4.7-6.8 inches
USB-C To USB-A Cable included.
Repair & Maintenance
This product is an official warranty product.
Warranty period: 1 year
Repair & Maintenance Center: Goldsmith Company Limited
Address: Room 10, 4/F, Hi-Tech Industrial Centre, Block B, 491-501 Castle Peak Road, Tsuen Wan, New Territories, Hong Kong
TEL.: +852 3619 0127